Powder 8812-Ni | Certilas: The filler metal specialist

Retour

spécifications du produit
conditionnement
demander un devis

Type

Carbide powder, agglomerated and sintered

Crystal size of WCApparent Density (ISO 3923-2)Particle Size Range in μmParticle Shape2.5 μm FSSS4.3 – 5.4 g/cm22/5 - 38/15 - 53/22Preponderant spherical

Not required

classification

EN ISO

14232-1 WC-Ni 88/12

Applications

carbide powder for wear resistant coatings produced by flame-, plasma or hig hvelocity- flame-spraying (HVOF). Tungsten-Carbide-Nickel-coatings are resistant to abrasion and oxidation. In comparison with WC-Co layers they show an improved corrosion resistance in aqueous solutions. Plasma sprayed coatings can achieve a hardness of up to 1000 HV0.1 and tensile strength acc. to DIN 50160 of 60 N/mm². The maximum operating temperature is 750°C.

Type

Carbide powder, agglomerated and sintered

Applications

carbide powder for wear resistant coatings produced by flame-, plasma or hig hvelocity- flame-spraying (HVOF). Tungsten-Carbide-Nickel-coatings are resistant to abrasion and oxidation. In comparison with WC-Co layers they show an improved corrosion resistance in aqueous solutions. Plasma sprayed coatings can achieve a hardness of up to 1000 HV0.1 and tensile strength acc. to DIN 50160 of 60 N/mm². The maximum operating temperature is 750°C.

Propriétés

Crystal size of WCApparent Density (ISO 3923-2)Particle Size Range in μmParticle Shape2.5 μm FSSS4.3 – 5.4 g/cm22/5 - 38/15 - 53/22Preponderant spherical

Classification

EN ISO

14232-1 WC-Ni 88/12

Convient pour

Fan blades, Pump components, Dies, Valve seats, Oilfield equipment
Other protective measures against erosion, abrasion, and sliding wear…

Positions de soudage

Etuvage

Not required

Gas acc. EN ISO 14175

None

Analyse

Ni	WC
12	88

fiche produit

déclaration de performance

déclaration de conformité

fiche produit

demander un devis

Certilas

Certilas

Avertissement

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.