Type
High-alloyed tubular wire on a C-Cr. carbide basis for abrasive wear resistance in combination with corrosion.
classification
EN ISO
14700: T ZFe14
DIN
8555: MF 10-60-CGT
Applications

CEWELD ® OA 54 L is a high C-Cr alloyed flux-cored wire. It is suitable for applications that are subject to heavy wear from mineral substances and corrosion.
Its main applications are in the following areas: corrosion-resistant kneaders, bushings, pumps, mixer blades, screw conveyors, press screws, oil screws.

Type
High-alloyed tubular wire on a C-Cr. carbide basis for abrasive wear resistance in combination with corrosion.
Applications

CEWELD ® OA 54 L is a high C-Cr alloyed flux-cored wire. It is suitable for applications that are subject to heavy wear from mineral substances and corrosion.
Its main applications are in the following areas: corrosion-resistant kneaders, bushings, pumps, mixer blades, screw conveyors, press screws, oil screws.

Properties

CEWELD ® OA 54 L should be applied in 2-3 layers with a maximum thickness of 8-10 mm.
Crack-free application of the weld metal is possible with appropriate heat management. It should be preheated to approx. 450°C, and the temperature should be maintained during the welding process.
Care should be taken to ensure slow cooling, using oven cooling if necessary.
Cracks in the weld metal can only be avoided with high preheating.

Classification
EN ISO
14700: T ZFe14
DIN
8555: MF 10-60-CGT
Suitable for

56-59 HRc hardfacing alloy, Mixing peddles, Press screws, Kneading machine, screw conveyors, pumps etc.

Welding positions
PA
PB
Redrying
140°C / 24 hr
Analysis
C Si Mn Cr Ni Mo Nb Ti V N Fe W B Co Cu Al
3.7 1.2 0.2 32 0.2 Rem.
Mechanical Properties
Heat
Treatment		 RP0,2
(MPa)		 Rm
(MPa)		 A5
(%)		 Hardness
As Welded 57 HRc
Product sheet
declaration of conformity
SDS
Product sheet
Ask quotation
SDS